Lightning Master – Static Solutions & Lightning Protection

Ketek is the official distributor of Lightning Master.
Lightning-Master-Grounding-Systems-Canada

Established in 1984, Lightning Master® is a global, full service, static solutions, lightning and surge protection manufacturing company. They serve a wide range of customers including oil, gas, chemical and other industrial facilities. Their complete line of products, systems and consulting services are backed by our worldwide customer service. Their track record of success in the Americas, Asia, Africa, Europe and the Middle East has established LMC as a global authority on lightning and static protection. Ketek Group is proud to distribute Lightning Master products in Canada.

In-tank Static Drain for above-ground storage tanks

The simple, effective way to protect above-ground storage tanks from static buildup

Easily installed into most above-ground storage tanks

Suitable for tanks with mixing blades

Coils and uncoils as floating roofs raise and lower

An alternative to retractable grounding reels

In-Tank-Static-Drain-Solution-Ketek-Edmonton

HOW IT WORKS

Charge dissipates from a fluid into points and sharp edges, not flat surfaces. That is why charge does not readily dissipate into the shell of a metal tank – it is flat. This allows the charge to accumulate at a rate faster than it dissipates. Because the static charge eventually relaxes, an incendive spark is most likely while the charging mechanism is active. The wild card in tank protection has always been equalizing the bound charge on the stored product. Even in a steel tank, there is nothing to help dissipate the bound charge on the stored product. The liquid simply lies against the side of the tank, and the charge must inductively couple onto the flat surface. It takes time for the potential to relax, allowing the static charge to accumulate faster than it dissipates.

Lightning Master has designed an in-tank static drain consisting of a stainless steel cable with stainless steel electrodes inserted into the wind of the cable. In fixed roof tanks, the drain is installed through the thief hatch, and in floating roof tanks, it is attached to the floating roof and sides or bottom of the tank. The thousands of electrically sharp points provide a low-resistance path for bound charge to leave the liquid and vapor space. It dissipates the charge on the product, allowing it to relax much more quickly. This allows the charge to dissipate faster than it accumulates.

Moveable Arm Grounding System

Lightning protection for floating-roof tanks

Complies with a variety of international standards

Top-quality materials and easy installation

No spring-loaded parts or retracting materials

Wind tested to simulated 175 kph winds without wear or failure

HOW IT WORKS

Lightning becomes an issue when it strikes the floating roof, the tank or nearby. Ignition is not normally caused by the heat of the lightning channel igniting venting vapours. It is caused by arcing from the secondary effect of lightning. A thunderstorm is an electrically charged cloud mass with a charge, usually negative, at its base. That charge induces an opposite charge, usually positive, on the surface of the Earth beneath it.

When lightning attaches to a tank or other object on the surface of the Earth, the charge at the point of attachment changes dramatically and almost instantly. The surrounding ground charge rushes toward the point of the strike. If that in-rush of charge crosses a gap, it may arc. If that gap is between the floating roof and the side of the tank shell, and there are flammable vapours present, those vapours may ignite. The MAGS system provides preferred path for that charge to travel, preventing arcing and ignition.

With you every step of the way

1. Site survey and evaluation
  • Our field engineers create a detailed report with the findings and recommendations for your site
  • Our team of experienced engineers perform forensic analysis of lightning and static damage
2. System design
  • We custom-tailor site-specific protection
  • We help you write specifications and best practices that meet your needs
3. Products
  • Bonding and grounding
  • Surge protection devices
  • Structural lightning protection
  • In-tank static dissipators
4. Customer service
  • Turn-key installation by Lightning Master-trained crews
  • Training, supervision, and ongoing support of customer personnel or contractors
  • Lightning Master approved installation contractors (in selected areas)

24/7 Customer Care

Toll Free:1-855-447-5050
Tel: 780-447-5050

Visit Lightning Master website for more information

Menu
LinkedIn
Share